When The Following Messages Appear - JVC DLA-RS620 Instructions Manual

When the Following Messages Appear...

Message
No Input
.
HDMI-1
.
Lamp replacement
Back
.
66
Description
No device is connected to the input
0
terminal.
The input terminal is connected but
0
there is no signal.
A video signal that cannot be used with
this unit has been input (The names of
input terminals such as "HDMI-1" and
"HDMI-2" will be displayed in yellow).
Indicates that the lamp needs to be
replaced soon.
To clear the message, press the [BACK]
button on the operation panel of the
BACK
projector unit or the remote control.
Action
Input the video signals.
Input video signals that can be used.
(P. 74)
Get ready a new lamp unit and replace
as soon as possible. Reset the lamp time
after replacing the lamp. (P. 58, 60)