JVC DLA-VS2200ZG Instructions Manual page 54

Remote control does not work
Check
Are the batteries correctly loaded?
Are the batteries exhausted?
Is there an obstructing object between
the remote control and remote sensor?
Is the remote control held too far away
from the unit?
Color does not appear or looks unnatural
Check
Is the AV device properly connected?
Is the image correctly adjusted?
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Video images are missing
Check
Has screen mask been configured?
Is the display position misaligned?
Projected image is dark
Check
Is the lamp near exhaustion?
Is the image quality correctly adjusted? Adjust "Picture Adjust" and "Aperture".
Match the polarities (t s) correctly when loading the
batteries.
Replace with new batteries.
Remove any obstructing object.
Hold the remote control closer to the sensor during use.
Connect the AV device properly.
Adjust "Color" and "Tint" accordingly.
Adjust the focus.
Set the unit at a correct distance from the screen.
Set "Mask" to "Off".
Alter the "Picture Position" value so that the entire image
appears on the screen.
Check the lamp time in the "Information" menu. Prepare a
new lamp unit or replace as soon as possible when the
lamp is near exhaustion.
Action
Action
Action
Action
Action
Refer to
p. 16
p. 16
p. 16
p. 16
Refer to
p. 21
p. 28
Refer to
p. 34
p. 60
Refer to
p. 33
p. 32
Refer to
p. 42
p. 43
p. 31
53