JVC DLA-VS2200ZG Instructions Manual page 63

Types of Possible Input Signals
Video
Digital Video Signal
PC signal (HDMI)
No. Designation Resolution
1 VGA 60 640×480
2 VGA 59.94 640×480
Indicator Display on the Main Unit
Meaning of the lighting figures
The indicator lights up.
Operation mode display
Displays using the different colors and solid/blinking light of the "STANDBY/ON" indicator.
"STANDBY/ON" lights up (red)
In standby state
STANDBY/ON TANDBY ND LAMP
"STANDBY/ON" blinking (red)
In the Cool-down mode
STANDBY/ON TANDBY LAMP
Estimated timing for lamp replacement
Displays using the solid/blinking light of the "LAMP" indicator. The "STANDBY/ON" indicator, which shows the operating
mode of the unit, is displayed simultaneously as described above.
"LAMP" lights up (orange)
STANDBY/ON
62
480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 720p/60 Hz, 1080p/50 Hz, 1080p/60 Hz
fh [kHz] fv [Hz]
31,500 60,000
31,469 59,940
"STANDBY/ON" lights up (green)
During lamp startup
WARNING STANDBY/ON TANDBY ND
"STANDBY/ON" blinking (green)
When the video image is temporarily hidden (HIDE is on)
WARNING STANDBY/ON TANDBY
When lamp replacement is near (lamp time has
LAMP LAMP AM WARNING
exceeded 2900 hours)
Total No.
dot CLK
of Dots
[MHz]
[dot]
25,200 800
25,175 800
The indicator appears blinking.
LAMP WARNING
LAMP WARNING
3900 hours)
Total No. No. of
Effective
of Lines Effective
[line] Dots [dot]
525 640 480
525 640 480
All lights off
During projection
STANDBY/ON LAMP WARNING
No. of
Lines
[line]