Sony DECR-1000 A Instruction Manual page 26

Setting up with the administration tool
2
Click "OK".
Upon successfully logging in, the main screen of
the administration tool is displayed.
Administrator
These options allow the user to modify settings
and update the software of the unit.
Administrator Change the administrator
password password.
User password Change the user
password.
Reset of setting Initialize the selected
settings.
Save & load Save settings, and
synchronize the saved
settings with this unit.
Network Configure the necessary
settings for network
connections.
Update of CP Update the software for
the communication
processor.
Restart of Restart programs
dtnetm communicating with the
host PC via the DECI
protocol.
Date & time Configure the time and
time zone.
26
Setting up with the administration tool
User
The following unit settings can be displayed.
Some settings can also be adjusted.
Network Verify the network
settings.
Software Verify the version
version of CP numbers of software
packages for the installed
communication
processor.
Target Check the status of the
development target.
Boot Verify and change the
parameters boot parameters settings.
BD emulator Confirm or change the
BD emulator settings.
Setting up – Administrator
Click on the desired item to the right of
"Administrator".
Administrator password
Upon clicking "Administrator password", the
following screen is displayed. This screen is
utilized to change the password used for
administrator authentication.
Enter the desired password in the "Password" and
"Retype Password" fields. Click "Setting" to
complete the configuration.