Table of Contents
Advertisement
Part names and usage
G Drive indicators
(7a)
HDD(DEV) drive indicator
Illuminates when the HDD(DEV) bay is selected
(7b)
BD drive indicator
Illuminates when the Blu-ray Disc drive is selected
H Foot switch connector
For connection to the supplied foot switch
I USB connectors
For connecting a USB connector (A type)
(9a)
Extension connectors
Currently not used
J CF slot
For inserting a CompactFlash® card
(10a)
CF access indicator
Flashes while accessing a CompactFlash® card. While the slot is being accessed, do
not insert or remove the card. Doing so may result in damage to the card or data
corruption.
K Memory Stick™ slot
For inserting Memory Stick™ media
(11a)
Memory Stick™ access indicator
Flashes while accessing Memory Stick™ media. While the slot is being accessed, do
not insert or remove the Memory Stick™ media. Doing so may result in damage to the
media or data corruption.
L SD Memory Card slot
For inserting an SD Memory Card
(12a)
SD Memory Card access indicator
Flashes while accessing an SD Memory Card. While the slot is being accessed, do not
insert or remove the SD Memory Card. Doing so may result in damage to the card or
data corruption.
M GPO indicators
Can be controlled by the user program. Illumination status of these LEDs will change as the
boot sequence progresses.
N GPI switches
Can be used by the user program
O WLAN access indicator
Illuminates when a wireless LAN connection has been established and flashes while the
connection is being accessed
P Reset button
For initiating a reset of the system
Q Network initialise button
Restores the factory default values for the IP address settings. While holding down this button,
press the power button.
R System initialise button
Restores the factory default initial state to the communication processor software. While
holding down this button, press the power button.
12
Part names and usage
Advertisement
Table of Contents
