Setting Up With The Administration Tool - Sony DECR-1000 A Instruction Manual

Setting up with the administration tool

Setting up with the administration tool
Preparing for setup
Connect the host PC to the network of the unit.
Then set up a web browser disabling the use of
proxy servers. Refer to the instruction manual of
the host PC for more details.
Turning on the unit
After configuring the debugging network settings
of the host PC, turn on the unit.
1
Turn on the main power switch
(t page 14).
This turns on the unit and starts system
initialization. During initialization, the power
indicator flashes red. This LED turns solid red
when the initialization process is complete.
Starting the administration tool
Start up the administration tool on the host PC.
The following section assumes use of the IP
address 192.168.0.2 for the unit.
1
Start the Web browser on the host PC.
2
Type http://192.168.0.2/ in the address
field of the Web browser, and press the
Enter key.
The language selection screen is displayed.
3
Select the display language for the
administration tool.
The login screen is displayed.
Select the language (for example English) here.
Login
Log in with a user name and password.
1
Enter the user name and password as
follows:
To log in as the administrator, enter the
"Administrator" user name and password as
follows:
• user name: Administrator
• password: Administrator
* These are the factory default settings.
When logged in as the administrator, all of the
functions shown in the Administration Tools menu
are active.
To log in as a user, enter the user name and
password as follows:
• user name: User
• password: User
* These are the factory default settings.
When logged in as a user, only the "User"
functions shown in the Administration Tools menu
are active. The "Administrator" functions cannot
be used.
Setting up with the administration tool
25