Table of Contents
Advertisement
Part names and usage
Unit rear
(21a)
(29a)
U (21a)(21b) Vent
Be sure not to obstruct these vents, as doing so may cause a fire or a malfunction. Also, the unit
must be kept at least 10 cm (3.94 in) away from a wall to satisfy this requirement.
V (22a)(22b) Vent fan
Be sure not to obstruct these vent fans, as doing so may cause a fire or a malfunction. Also, the
unit must be kept at least 10 cm (3.94 in) away from a wall to satisfy this requriement.
W Monitor connector
For connection to a device with a VGA input connector
X AV MULTI OUT connector
For connection to a device with an AV MULTI input connector
Y Main power switch
Z AC IN connector
wj Vent
Be sure not to obstruct this vent, as doing so may cause a fire or a malfunction. Also, the unit
must be kept at least 10 cm (3.94 in) away from a wall or from the rear panel of the rack to
satisfy this requirement.
wk Service connector
For use by service personnel only
wl LAN connector for development
For connection to a debugging network through which the unit communicates with the
development host PC. Conforming to the auto-negotiation standard, it supports 10BASE-T,
100BASE-TX, and 1000BASE-T.
Its automatic polarity recognition feature allows the use of a straight cable instead of a cross
cable even when it is directly connected with the host PC. Use an Enhanced Category 5 or
Category 6 Ethernet cable to connect to a Gigabit hub or other Ethernet device.
The MAC address is displayed near the connector.
Caution
Be careful not to confuse this connector with the LAN connector for PLAYSTATION®3 es.
(29a)
Link indicator
Off
Solid green
14
Part names and usage
(22a)
ANT
ANALOG AUDIO OUT
1
2
3
4
DEV
LAN
(29b)
(32a)(32b)
Transmission in 10-Mbps/100-Mbps mode
Transmission in 1000-Mbps mode
(22b)
(21b)
MONITOR
AV MULTI OUT
EXT
DIGITAL OUT
HDMI OUT
LAN
(OPTICAL)
(32c)
MAIN POWER
~
AC IN
HDMI OUT(EXTRA)
(34a)
Advertisement
Table of Contents
