Sony DECR-1000 A Instruction Manual page 20

Attaching the unit to the rack
2 Attaching the outer rails to the rack
1
Attach the rail brackets (type A) C or
(type B) K to the outer rails with the
large plate nuts D and screws E, but
do not tighten the screws at this point.
Rack (type A)
E
Rack (type B)
2
Adjust the bracket position so that the
end of each rail is at least 60 mm (at least
2.36 in) away from where the handles are
to be attached to the rack, and then
tighten the screws E to secure the rail
brackets.
Rack
60 mm
(2.36 in) or more
20
Attaching the unit to the rack
D
C
Outer rail
3
Attach the brackets to the rack using the
small plate nuts F, hexagon socket head
cap screws G, and flat washers H.
Rack (type A)
12.7
15.9
15.9
12.7
15.9
15.9
12.7
(mm)
Rack (type B)
15.9
15.9
12.7
15.9
15.9
(mm)