To Insert The Batteries; Using Your Shaver - Axis AX-1300 Instruction Manual

TO INSERT THE BATTERIES

1. Slide the On/Off Switch down to the "Off" position.
2. Remove the Battery Compartment Cover by
pulling it straight down from the shaver body.
3. Insert 2 "AA" alkaline batteries. Be sure to orient
the batteries properly to the (+) and (-) indicators.
Caution: When your device requires
new batteries, please insert only
2 new AA alkaline batteries. You
must not combine one old or used
battery with one new battery as seri-
Axis Rev |10| English
ous leakage will occur and thus damage the unit.
*If you use your shaver daily, the alkaline batteries
will provide approximately 50 minutes of shaving
operation time. If the operating power seems low,
replace the batteries.

USING YOUR SHAVER

1. Remove the protective plastic headguard.
2. Ensure that the foil screens and inner cutters
are not damaged. Replace damaged parts before
using. To obtain replacement parts, refer to the
Axis Rev |11| English