Axis AX-1300 Instruction Manual page 10

TO REPlACE FOIl SCREENS
Skin irritation or a deterioration of shave quality typ-
ically indicates that your foils need to be replaced.
Replacement intervals will vary with individual use
and hair types.
1. Remove the outer foil assembly by pressing the
release buttons on both
sides of the shaver and
gently lift it off.
2. Position the replace-
ment head assembly
Axis Rev |1| English
over the cutters. Be careful not to damage the foils.
Gently slide the head assembly down until it seats
firmly into place.
TO REPlACE THE INNER CUTTERS
NOTE: Always replace foil screens when replac-
ing the inner cutters.
1. Remove the foil screen assembly by pressing
the release buttons on both sides of the shaver
and lifting the assembly off.
2. Grasp each of the two sets of inner cutters on
Axis Rev |1| English