Performance; Mechanical Resistance And Stability - Hilti HIT-HY 200-R V3 Manual

3. PERFORMANCE OF THE PRODUCT AND REFERENCES TO THE METHODS USED FOR
ITS ASSESSMENT
The tests for performance assessment of Hilti HIT-HY 200-R V3 were carried out in compliance with
EAD 332402-00-0601 according to the test methods reported herein, as well for what concerns
sampling, conditioning and testing provisions.
3.1 MECHANICAL RESISTANCE AND STABILITY (BWR 1)
# Essential characteristic
Resistance to combined pull-out and
1
concrete failure in uncracked concrete
2 Resistance to concrete cone failure
3 Robustness
4 Resistance to bond-splitting failure
Influence of cracked concrete on resistance
5
to combined pull-out and concrete failure
4. ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE (AVCP)
SYSTEM APPLIED, WITH REFERENCE TO ITS LEGAL BASE
In accordance with the European Assessment Document EAD No. 332402-00-0601 the applicable
European legal act is: Decision 1996/582/EC.
The AVCP system to be applied is: 1
5. TECHNICAL DETAILS NECESSARY FOR THE IMPLEMENTATION OF THE AVCP
SYSTEM, AS PROVIDED FOR IN EAD 332402-00-0601
Technical details necessary for the implementation of the AVCP system are laid down in the Control
Plan deposited at ITC-CNR.
ETA 19/0665 v03 of 22/01/2020
Issued in San Giuliano Milanese, Italy on 22/01/2020
by ITC – CNR
Professor Antonio Occhiuzzi
Director of ITC-CNR

Performance

See Annex C1
See Annex C1
See Annex C1
See Annex C1
See Annex C1
page 3 of 18