Technical Description Of The Product; Specification Of The Intended Use - Hilti HIT-HY 200-R V3 Manual

SPECIFIC PARTS
1.

TECHNICAL DESCRIPTION OF THE PRODUCT

The injection system Hilti HIT-HY 200-R V3 is a post-installed rebar system consisting of a foil pack
with injection mortar Hilti HIT-HY 200-R V3 and a reinforcing bar.
The steel element is placed into a drilled hole filled with injection mortar and is anchored via the
bond between steel element, injection mortar and concrete.
The product description, with reference to its components, is given in Annex A.
2. SPECIFICATION OF THE INTENDED USE IN ACCORDANCE WITH EUROPEAN
ASSESSMENT DOCUMENT N° 332402-00-0601 (hereinafter EAD)
The Hilti HIT-HY 200-R V3 is intended to be used in reinforced or unreinforced normal weight, non-
carbonated concrete without fibres C20/25 to C50/60 according to EN 206:2013+A1:2016 and which
are allowed with straight deformed post-installed reinforcing bars (rebars) according to EOTA TR
069.
Concerning product packaging, transport and storage it is the responsibility of the manufacturer to
undertake the appropriate measures and to advise his clients on the transport and storage, as he
considers necessary in order to reach the declared performances.
The information about installation is provided with the technical documentation from the
Manufacturer and it is assumed that the product will be installed according to it or (in absence of
such instructions) according to the usual practice of the building professionals.
The specifications and conditions given by the manufacturer are summarized in Annex B.
The performances assessed in this European Technical Assessment, according to the applicable
EAD, are based on an assumed intended working life of at least 50 years, provided that the
conditions for the installation, packaging, transport, storage, installation as well as appropriate use,
maintenance and repair are met. The indications given on the working life cannot be interpreted as a
guarantee given by the manufacturer, but are to be regarded only as a means for choosing the right
products in relation to the expected economically reasonable working life of the works.
ETA 19/0665 v03 of 22/01/2020 page 2 of 18