General Part - Hilti HIT-HY 200-R V3 Manual

Istituto per le Tecnologie
della Costruzione
Consiglio Nazionale delle Ricerche
Via Lombardia 49 - 20098 San Giuliano Milanese – Italy
tel: +39-02-9806.1 – Telefax: +39-02-98280088
e-mail: segreteria.itab@itc.cnr.it
European Technical Assessment

GENERAL PART

Trade name of the construction product
Product family to which the construction
product belongs
Manufacturer
Manufacturing plant
This European Technical Assessment
contains:
This European Technical Assessment is
issued in accordance with Regulation (EU)
n° 305/2011, on the basis of
This version replaces
The European Technical Assessment is issued by ITC-CNR in English language. Translations of this
European Technical Assessment into other languages shall fully correspond to the original issued document
and should be identified as such. Communication of this European Technical Assessment, including
transmission by electronic means, shall be in full (excepted the confidential Annex(es) referred to above).
However, partial reproduction can be made with the written consent of ITC-CNR (issuing Technical
Assessment Body). In this case partial reproduction has to be designated as such.
ETA 19/0665 v03 of 22/01/2020
Designated
according to
Article 29 of
Regulation (EU)
N° 305/2011.
ETA 19/0665 of 22/01/2020
Hilti HIT-HY 200-R V3
PAC 33: FIXINGS
Post-Installed Reinforcing Bar (Rebar)
Connections with Improved Bond-Splitting
Behaviour Under Static Loading
Hilti Corporation
Feldkircherstrasse 100
9494 Schaan | Liechtenstein
Hilti Corporation
18 pages, including 10 annexes which form
an integral part of this assessment
EAD 332402-00-0601 – Post-Installed
Reinforcing Bar (Rebar) Connections with
Improved Bond-Splitting Behaviour Under
Static Loading
ETA 19/0665 (version 02) of 03/12/2019
EOTA Member
www.eota.eu
European Organisation for
Technical Assessment
Organisation Européenne
pour l'évaluation technique
page 1 of 18