Konica Minolta DF-601 Installation Manual page 3

I Adjusting the Document Feeding Tray Width
4582U013AA
4037IXE295DA
4582IXE508DA
4582IXE509DA
1. Plug the power cord into the power outlet
and turn on the machine.
2. Widen the width across the edge guides by
sliding them to their maximum width.
3. Display the Service Mode screen.
(For details of how to display the Service
Mode screen, see the Service Manual.)
4. Touch "ADF."
5. Touch "Original Tray Width."
6. Touch "Max. Width" and then press the Start
key.
Check that "Adjustment Result" is "OK."
DF-601
4582U014AA
4582IXE510DA
– 2 –
7. Narrow the width across the edge guides by
sliding them to their minimum width.
8. Touch "Min. Width" and then press the Start
key.
Check that "Adjustment Result" is "OK."
9. Touch "END."
10. Touch "Exit" on the Service Mode screen.