Table of Contents
Advertisement
El
3.6
MONITOR (EVMbug) COMMANDS
The monitor (EVMbug) commands are listed alphabetically by mnemonic in Table 3-3. Each
of the commands are described in detail following the tabular command listing.
Additional terminal keyboard functions are as follows:
(BREAK)
Abort command
(CTRL)A
Default transparent mode exit character
(CTRL)H
Backspace
(CTRL)S
Freeze screen
(CTRL)X
Cancel command line
(RETURN)
Enter command
NOTE
When using the control key with a specialized command such as
(CTRL)X, the (CTRL) key is depressed and held, then the X key is
depressed. Both keys are then released.
During memory display output to terminal, (CTRL)S will delay the output until another
character is entered.
Command line input examples in this chapter are amplified with the following:
Underscore entries are user-entered on the terminal keyboard.
Command line input is entered when the keyboard (RETURN) key is depressed.
Typical example of this explanation is as follows:
>MD 100 21F
EVALUATION MODULE USER'S MANUAL
3-8
MOTOROLA
M68705EVM
Advertisement
Table of Contents
