Guide To Malfunctions - Progres Agronic Instruction Manual

Outlets Input 220V, outlets 24V
CP Box terminal, connected to earth (build-in model).
C Outlet common 24 V.
M
1-6
1-12
1-18

3.3. GUIDE TO MALFUNCTIONS

- Valves do not work:
Check the state of the fuses.
Check if any cable is disconnected or cut.
- The equipment does not work properly:
a) There is a black stripe on the screen:
Unplug the unit, open it, remove the keyboard
and, with a screwdriver, cross the two contacts on
the central part of the left side marked as "J3",
during two seconds, and reconnect the supply.
Outlet assignation tables according to unit models.
Input 12V, outlets 12V
Outlet common 12 V.
General valve
Filter outlets
Model
b) The screen is completely blank:
Check whether
equipment.
Check the state of the fuses.
- The unit fuses the general fuse constantly:
The overload protector is short-circuited, it is
necessary to replace it. This happens when the unit
is supplied at 380V, for example, or there is an
overload due to a storm and the "general fuse" is
superior to the one indicated in the section about
technical characteristics.
Input 12V, outlets 12V
Latch option 3 cables
Stop common
Start common
the power reaches
5
the