Table of Contents
Advertisement
2. DIMENSIONS
3. INSTALLATION
3.1. PLACING THE UNIT
Place the unit at the right position and height.
Avoid direct sun exposure, humidity, dust and
vibrations.
Avoid proximity to any source of interference,
which could affect the correct working of the unit.
In
the
version
equipment is provided in a hermetically sealed box
(IP65) with a transparent front cover for the
keyboard/displayer and an opaque cover for the
connection housing.
To maintain the isolation of the unit, it is essential
to keep the panels closed, as well as to install
with
"mounting
box",
grommets at the cable outlets, which are provided
with the equipment.
For the wall mounting of the unit, there are two
holed pieces in the upper corners. There are also two
more holes in the inside of the connection housing.
In the "built-in" model, a
hole is to be done in the
frontal part of the wall or desk,
according to the measures in
the section DIMENSIONS. It
the
will be held with the screws at
the corners, using the four
pieces provided with the unit.
3
Advertisement
Table of Contents
