Basic Steps - Onbon OVP-M2D User Manual

Power
voltage 100-240V 100-240V~50/60Hz
Video input port
DVI Computer digital signal input port
HDMI digital HD signal input port
EXT digital HD signal extension port
VGA Computer analog signal input port
CV PAL\NTSC Compound video signal input port
Video output port
DVI1 - DVI2
Audio input output port
HDMI audio
AUDIO-IN
AUDIO-OUT
Control port
COM
WIFI

Basic steps

Click [OK] to enter the main menu interface, and then follow the steps below to set the
controller:
The first step: Set LED screen parameters (width, height, network port width and height
and start) according to the size of the LED screen;
Step 2: Select the corresponding signal source according to the signal source required
by the user;
Step 3: If necessary, make appropriate adjustments to the "display window";
DVI output port,connect the LED sending card via DVI connection cable.
HDMI video input port built-in
outside audio input port
Analog audio output port for the selected input signal source audio.
USB control port
WIFI（optional）
www.onbonbx.com
5