User Mode Save And Switch - Onbon OVP-M2D User Manual

8. Factory setup
Choose "FACTORY SETUP" in "OPTION"， as below:
ADC correct：Usually, "VGA\CV correct" was done before selling in our factory.

Language： "Chinese"and "English", default is Chinese.

Factory reset：Reset to default value.

Firmware version：Check present hardware version, factory date.


USER MODE SAVE AND SWITCH

Mode save
Press "SAVE" on board, as below:
Select the save mode you want, then, click【OK】.
Note:
（1）If the circle is solid, means the present mode data is already there; If the circle is hollow,
means the present mode data is not there.
www.onbonbx.com
16