Output Setup - Onbon OVP-M2D User Manual

Option

Output setup

1. LED size
Click【OK】as to enter into main menu, then choose "LED setting", as below:
After finish settings of LED size, system will be in reset status, users need to wait for a
while here.
Note: Size range
LED screen width <= 3840
LED screen height <= 2000
LED refreshment：60 or 50
Input EDID (horizontal width,vertical width,refresh rate) Input hot spare
(close, backup for input source) VGA setting (adjust automatically,horizontal
start,vertical start) Planned tax(tax 1, tax 2...) Other setting(switch stunt,
voice setting) Testing photo(close, photo 1 to photo 8) Button lock(open,
close) Factory reset(ADC calibration,languages,factory reset,firmware
version)
www.onbonbx.com
9