Quick Start - Pentair eco select ULTRATEMP HX Series Owner's Manual

Quick Start

1� Unlock Keypad - An icon will show on the
screen indicating the keypad is locked. To
unlock: Press
ON/OFF
will sound, the keypad will be unlocked.
(UNLOCK)
ULTRATEMP HX
2� Set Clock - Press and hold
onds to enter into clock setting interface.
The clock will begin flashing, press
modify the hours. The hours of the clock will
start flashing, press
tons to alter the value for the hours. Press
again to set the hour. Repeat with the
TIMER
minutes.
(CLOCK)
3� Set Timer - Press
setting interface. Press
select the timer number (T1 or T2). Press
to modify timer. Use
TIMER
(CLOCK)
buttons to set value for "hour", press
to save. Repeat with minutes. After setting
Timer ON, repeat process with Timer OFF.
for 5 seconds, a 'buzzer'
Icon for Locked
mode
1
TM
TIMER
for 5 sec-
(CLOCK)
TIMER
(CLOCK)
and but-
UP DOWN
(HEAT/COOL) (DEFROST)
TIMER
to enter into Timer
(CLOCK)
and
UP DOWN
(HEAT/COOL) (DEFROST)
and
UP DOWN
(HEAT/COOL) (DEFROST)
TIMER
(CLOCK)
4� Turn on - Press
will start. A 'Sun' icon should show on the
screen, indicating the unit is in heating mode
(refer to page 22 for details on switching
between heating and cooling modes).
5� Adjust Temperature - Press
buttons to alter the value for the set
DOWN
temperature.
(DEFROST)
to
to
Page 7
Quick Start
for 1 second. The fan
ON/OFF
(UNLOCK)
Icon for Heating
mode
Icon for Cooling
mode
1
and
UP
(HEAT/COOL)