Configuration; Control Panel - Pentair eco select ULTRATEMP HX Series Owner's Manual

Configuration

Control Panel

Ref Icon
1 Heat Mode
2 Cool Mode
3 Set Temperature
4 Defrost
5 Water Temperature
ULTRATEMP HX
HIGH PERFORMANCE HEAT PUMP
TIMER MENU
(CLOCK) (SET) (HEAT/COOL)
Figure 9: Control Panel
Function
This icon will show if the UltraTemp is on and is in Heating mode.
The UltraTemp will heat the water until the set temperature is
reached.
This icon will show if the UltraTemp is on and is in Cooling mode.
The UltraTemp will cool the water until the set temperature is
reached.
This shows the set temperature. Press the UP/DOWN buttons to
alter the set temperature. The UltraTemp will heat/cool the water
until the Set Temperature is reached.
This icon will show when defrost mode is activated.
This shows the inlet water temperature to the UltraTemp. It repre-
sents the actual water temperature of the pool or spa.
Page 17
1
TM
/
UP DOWN ON/OFF
(DEFROST) (UNLOCK)
Configuration