Table of Contents
Advertisement
Available languages
Available languages
User manual
4.3.- Amplifier
OPTION "A" - 5075
1
2
3
4
1.- RF output
5.- Powering input
2.- Test socket
6.- Attenuator
3.- RF input
7.- LED
4.- RF input
It disposes of two input signal connectors so as to mix the channels
that come from two systems. If only one of the inputs is used, it is
advisable to load the unused input with 75 ohm, ref 4061.
It disposes of n output
connector and a Test socket (-30dB)
located at the top of the front panel.
The amplifier is powered with 15V via a cable, the same type as
that used to power the other modules of this system.
The amplifier amplifies the channels that are generated in the TDTs +, covering the frequency margin from 47 to 862 MHz.
OPTION "B" - 4510 / 4514
5
6
7
234632
1.- Input test socket
2.- RF input
3.- Output test socket
Amplifier with zamak chassis, its gain can be configured by the
installer.
It can be used as a headend or line amplifier in CATV systems.
11
6
1
2
3
4
5
4.- RF output
5.- LED
6.- Powering
TDT +
Advertisement
Table of Contents
