Eaton Moeller MFD-CP4-CO Hardware And Engineering page 19

05/08 AWB2528-1611en
Mounting
Mount the protective cover as shown in the figure.
X
Figure 11: Mounting the protective cover
Sealing the protective cover
Figure 12: Sealing the protective cover
The grip handle of the protective cover is provided with holes
that can be used in any mounting position. You can fit a wire
or similar material through these holes in order to seal the
cover. If the wire is provided with a lead seal, the cover is
sealed. The cover can then only be opened by breaking the
seal or the wire.
15