The Display Shows "C3"; The Display Shows "F102" - Zanussi ZOPND7X1 User Manual

Possible cause
The clock is not set.
The necessary settings are not set.
The automatic switch-off is activated.
The door is not closed correctly.
The fuse is blown.
The oven Child Lock is on.
Description
The lamp does not operate.
Description

The display shows "C3".

The display shows "F102".

The oven does not turn on or does not heat up
Problems with components
Possible cause
The lamp is defective.
Display shows:
Possible cause
The cleaning function does not
operate. You did not fully close
the door, or the door lock is
defective.
• You did not fully close the
door.
• The door lock is defective.
Remedy
Set the clock.
Make sure that the settings are correct.
Refer to "Automatic switch-off".
Fully close the door.
Make sure that the fuse is the cause of the mal-
function. If the fuse is blown again and again,
contact a qualified electrician.
Refer to "Using the Child Lock".
Replace the lamp.
Fully close the door.
• Fully close the door.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows "F102"
again, contact the Custom-
er Care Department.
Remedy
Remedy
31