Lamp Replacement; Troubleshooting; The Oven Does Not Turn On Or Does Not Heat Up - Zanussi ZOPND7X1 User Manual

A B
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Possible cause
The oven is not connected to an electrical supply
or it is connected incorrectly.
The oven is deactivated.
30
Before you replace the lamp:
Disconnect the oven from the

The oven does not turn on or does not heat up

Make sure that you install the middle panel of glass
in the seats correctly.
HOW TO REPLACE: LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the lamp.
Step 2
mains.
Check if the oven is correctly connected to the
electrical supply (refer to the connection diagram
if available).
Activate the oven.
Step 3
Put a cloth on the bottom of
the cavity.
Remedy
A
B