Table of Contents
Advertisement
PROGRAMMING TABBER
From "Select Option to edit" screen,
select # Tabs.
If # Tabs soft key is pressed:
Display prompts you to select number of tabs to
apply to mail piece.
1 – Selects one tab
2 – Selects two tabs
3 – Selects three tabs
BACK – Returns to previous screen.
What displays next depends on how many tabs
have been selected:
If you select 1 for # Tabs, "Select Option to
edit" screen reappears. If you select 2 or 3,
"Choose Placement Type" screen appears:
Separate – Allows individual adjustment
of each tab position via Offset Value.
Together – (Used for Stamps) Stamps are
placed next to each other, starting at Offset
Value (see below) set for Tab 1.
BACK – Returns to previous screen.
Pressing Position prompts you to set Offset
Value for each Tab, starting with Tab 1.
Offset Value = Distance from leading edge of
mail piece to leading edge of Tab.
NOTE: If you only set # Tabs for one Tab, display will skip this screen and open "Enter
offset for Tab 1 and press SAVE key" screen.
Tab 1 – Use to set Offset Value for Tab 1.
Tab 2 – Use to set Offset Value for Tab 2.
Tab 3 – Use to set Offset Value for Tab 3.
BACK – Returns to previous screen.
26
Advertisement
Table of Contents
