Table of Contents
Advertisement
OPERATING TABBER
Item
Description
Job #
Number of Job currently selected.
Sensor #
Indicates Sensor (#1 or #2) currently selected.
#Tabs
Number of Tabs being applied.
Distance between lead edge of tab and the next tab (including
Tab Pitch
space between tabs), plus 0.01".
Paper-L
Length of piece in selected measurement (inches, cm, mm).
Position on mail piece measures from leading edge of mail piece
Offset
to leading edge of tab/stamp.
Voltage on Sensors when a tab is present under Sensors. Clear
TabV
and Opaque Tabs will have different voltage readings.
Voltage used to determine threshold (activation point) between
Trip
Tab and Backing to cause tab to feed.
Two tab types: Clear and Opaque.
Tab Type
(See Appendix B for samples.)
1. Pressing RUN key changes screen to
running mode so that Rate in Pieces
per Hour and number of Pieces Run
are displayed.
2. To stop Tabber, press Red Stop key (next to RUN key on Control Panel).
INFO SCREEN INFORMATION
16
Advertisement
Table of Contents
