Hayter HARRIER 56 Owner's Handbook Manual page 15

1.13
ASSEMBLING THE MOWER FOR THE FIRST TIME
Check blade brake/clutch controls: Operate the blade stop
lever (A) several times, to ensure the lever moves freely. Hold
the lever against the handlebar in position (1) and check that it
returns to position (2) when released.
Use the right hand to hold the blade stop lever against the han-
dlebar (1) and use the left hand to push the blade clutch lever
(B) to the 'engaged' position (3). Remove the left hand and the
blade clutch lever should return to position (4), leaving the
blade drive clutch engaged.
Remove the right hand and check that the blade stop lever au-
tomatically returns to position (2). There should be an audible
'clunk' to indicate that the blade drive clutch has disengaged.
Check throttle lever operation: Operate the throttle lever
several times and ensure that the cable moves freely whilst op-
erating the engine throttle mechanism.
Check ground drive clutch lever operation: Operate the
clutch lever several times and ensure that the cable moves
freely.
ASSEMBLY INSTRUCTIONS 1.13
Continued.
2
A
CS047
4
3
CS048
B
2
4
A
CS049
B
CS255
CS051
343046BD310100
1
1
1