NSK iCare Operation Manual page 8

5-3 Mist Filter
Attach Mist Filters to the inside of the Door (Fig. 8).
5-4 Oil Absorber Sheet
Place an Oil Absorber Sheet at the bottom of the lubricating chamber of the Unit. The Oil
Absorber Sheet is designed to absorb residual Maintenance oil after lubrication (Fig. 9).
5-5 Connecting AC Power Cord
1) Turn OFF (O side) the Power Switch before connecting the AC power cord.
2) Insert the AC power cord plug so that it fits the Connector Socket at the rear of the Unit
(Fig. 10).
3) Plug the AC power cord into a wall outlet.
• Hold the plug when pulling out the AC power cord. If holding the cord part, the cord may be damaged.
• Be sure that the device has completely stopped before pulling out the AC power cord.
CAUTION
5-6 Setting of sound volume
"High" and "Low" sound volume can be switched by repeating the following procedure.
Close the Door then turn ON the Power Switch (I side) while pressing the Air Select Button.
7
Mist Filter Mist Filter
Fig. 8
Oil Absorber Sheet Oil Absorber Sheet
Fig. 9
Fig. 10