NSK iCare Operation Manual page 10

E Type handpiece (According to ISO 3964 type)
Straight Handpiece
1) Insert the supplied Test Bur into the handpiece and lock the chuck by turning the Bur Lock
Ring (Fig. 15).
2) Open the iCare door and attach the handpiece to the E-Type handpiece connector until it
locks (Fig. 16).
3) Push and pull the handpiece to be sure that it is securely attached.
4) Close the door securely.
Contra Angle Handpiece
1) Remove the bur from the handpiece.
2) Open the iCare door and attach the handpiece to the E-Type handpiece connector until it
locks (Fig. 16).
3) Push and pull the handpiece to be sure that it is securely attached.
4) Point the bur insertion hole toward the door and close the door securely (Fig. 14).
• Be sure to remove the bur from Air Turbine and Contra Angle Handpieces before attaching the handpiece to the adaptor or
Connector. For Straight handpieces be sure to insert the supplied Test Bur and lock the chuck before connecting to the E-Type
CAUTION
handpiece connector (Fig. 15).
• For Contra Angle and Air Turbine Handpieces point the Bur Insertion Hole towards the door and close the door (Fig. 14). Mist
Filters absorb the oil coming out of the handpiece.
NOTICE • NSK offers Handpiece Head Filters, which help absorption of oil from the handpiece during lubrication.
* For replacement Handpiece Head Filters, refer to "16. Option Parts List".
Tighten Tighten
Nut Nut
*C3 Type
Adaptor Adaptor
*C2 Type
9
Air Turbine Connector Air Turbine Connector
Tighten Tighten
Adaptor Adaptor
Fig. 11 *C2 Type
Bur insertion Hole Bur insertion Hole
Point toward the door Point toward the door
Fig. 13
Bur Lock Ring Bur Lock Ring
E-Type handpiece E-Type handpiece
Connector Connector
*C2 Type
Nut Nut
Fig. 12
Fig. 14
Test bur Test bur
Fig. 15
Fig. 16