Display And Control Panel - Eaton Pulsar Series Installation And User Manual

1.5

Display and Control Panel

Sub-module symbolic
LOAD PROTECTED
00.0kVA/000% LOADED
ONLINE MODE
0+4 redundant
(20) Load protected LED
(21) Downgraded operation LED
(22) Load not protected LED
(23) Alphanumeric display (4 lines)
(24) Escape (cancel) button
(25) Function button (scroll down)
(26) Function button (scroll up)
(27) Enter (confirm) button
(28) UPS OFF button
(29) UPS ON button
(30) Rectifier LED
(31) Battery LED
(32) Inverter LED
(33) Bypass LED
(34) Load supplied LED
(1) Sub-modules detection
(1) Sub-module detection
(2) The power sub-module and the battery
(2) The power sub-module and the battery
sub- module are not detected on the
sub-module are not detected on the level
level (MX Frame 15000 RT)
(Pulsar MX Frame 15000 RT)
(3) Internal battery sub-module fault
(3) Internal battery s ub-module fault detected detected
(4) Internal power sub-module fault
(4) Internal power sub-module fault detected
detected
For internal sub-module fault, see Section 5.2,
For internal sub-modul e fault, see section
Page 5 — 1.
5.2, page 33
86-87021-00 A01 - Page 11