UniCarriers PLL Series Instruction Handbook Manual page 58

14 SERVICING AND MAINTENANCE
WARNING!
For optimum performance and so as not to invalidate
the warranty, use only our genuine replacement
parts! Otherwise, we are unable to guarantee
stability and brake function.
WARNING!
Take care while lifting and securing the truck with a
block, as there is a risk of crushing injury.
Dismantling and assembling the castor wheel, PLL, PLE,
PSL, PSD, PS, PSH
Lift the load wheel off the ground and secure the truck with
blocks.
WARNING!
Ensure that the truck is unable to move while work is
in progress.
1) Remove the plastic cover from the machine housing.
2) Remove the bolts.
3) Take out the castor wheel assembly and support the fork in
a vice.
4) Undo the bolt and drive out the wheel axle. Now the wheel
can be taken out of the fork.
5) Install in the reverse order.
58
Torque
The bolts must be tightened to a torque of 47
Nm.
Dismantling and assembling the castor wheel, PLP
Lift the load wheel off the ground and secure the truck with
blocks.
WARNING!
Ensure that the truck is unable to move while work is
in progress.
1) Remove the plastic cover from the machine housing.
2) Remove the securing bolts.
3) Take out the castor wheel assembly and support the fork in
a vice.
4) Tap out the retaining pin, drive out the wheel axle and
remove the wheel from the fork.
NOTE!
In connection with a wheel change, the
retaining pin should also be replaced.
5) Install in the reverse order.