Warnings - UniCarriers PLL Series Instruction Handbook Manual

09 TRUCK COMPUTER (ATC)
SELECT LANGUAGE:
English
4) You will now enter the logon mode automatically with the
new language setting.
Operator ID:
?

Warnings

There are a number of different warnings used to catch the
driver's attention in the case of, for example, an operational
error. Certain of the truck's systems will also not be operable
until the driver has followed the command on the display.
•
Release throttle
The driver is asked to position the speed lever in neutral.
•
Release controls
The driver is asked to set all hydraulic levers to their
neutral positions.
•
Release tiller
The driver is instructed to place the steering arm to its
uppermost and lowermost positions.
Other warning messages are shown if, for example. a system in
the truck is beginning to overheat. If the warnings do not
30
disappear even though the driver has followed the instructions
on the display, contact and authorised service technician.