Servicing And Maintenance; Service Technician; Safety Instructions For Maintenance; Maintenance Intervals - UniCarriers PLL Series Instruction Handbook Manual

14 SERVICING AND MAINTENANCE

Service technician

NOTE!
Servicing and maintenance must be carried out by a
specially appointed and trained technician with a
good working knowledge of the truck's function and
maintenance.
To obtain the best results from your truck investment, we advise
you to contact an authorised service technician and take out a
service agreement for routine maintenance.

Safety instructions for maintenance

Working at height
Comply with local safety instructions when working at height.
Precautionary measures during repair
Extreme importance must be placed on precautionary
measures to avoid accidents during all work on the truck.
•
WARNING!
The battery plug should be pulled out before
working on the truck.
• Ensure that the drive wheel is off the ground before trouble
shooting. Secure the truck with blocks.
42
• To prevent injuries caused by crushing the battery plug
should always be removed when working on and around
the mast and hydraulic unit.
• When dismantling parts of the hydraulic system the system
must not be pressurised, e.g. the pump motor is shut off
and the forks are down.
• The battery should always be protected during grinding
work.
• When changing a fuse the controllers must be thoroughly
discharged. (Remove the battery plug and wait for two
minutes before fuses are changed, otherwise there a risk
of arcing.)
• Great caution must be observed when removing gas
springs.

Maintenance intervals

Recommended replacements
NOTE!
To ensure correct operation, use only original spare
parts.