UniCarriers PLL Series Instruction Handbook Manual page 26

08 BATTERY
8) Connect the battery plug.
9) Check the battery voltage on the battery indicator.
Maintaining and changing the battery PSH
1)
NOTE!
A battery carriage must be used when changing
battery.
Pull out the battery plug.
2) Open the battery cover.
3) Open the battery door using the battery key.
4) Roll out the battery on the battery carriage.
WARNING!
Observe care to avoid splashing waste acid or
oxide from the battery.
5) Perform a battery inspection in accordance with
Maintenance of the truck page 40.
6) Roll the battery back.
7) Close the battery cover.
8) Connect the battery plug.
9) Check the battery voltage on the battery indicator.
26
Maintaining and changing the battery PLP
1)
NOTE!
A battery carriage must be used when changing
battery.
Pull out the battery plug.
2) Release the battery lock.
3) Roll out the battery on the battery carriage.
WARNING!
Observe care to avoid splashing waste acid or
oxide from the battery.
4) Perform a battery inspection in accordance with
Maintenance of the truck page 40.
5) Roll in the battery after completed service.
6) Lock the battery in place with the battery lock and replace
the battery plug.
7) Check the battery voltage on the battery indicator.
Maintaining and changing the battery TS
1) Pull out the battery plug.
2) Remove the battery locks (one on each side of the truck).
3) Roll the battery out to one side. Note that a safety stop is
activated when the battery has reached halfway out. When