Maintaining And Changing The Battery - UniCarriers PLL Series Instruction Handbook Manual

4. Plug the connector into a mains power outlet. Charging will
start.
NOTE!
For safety reasons the truck cannot be driven
while the mains power connector is connected
to an outlet.
When the battery is fully charged the LED lights green.
5. Pull the connector out of the mains power outlet.
6. Dry off the battery to prevent leakage current and self
discharging.
7. Return the mains power connected to the truck and closes
the battery cover.

Maintaining and changing the battery

Maintaining and changing the battery PL*/PS*, PS
1) Pull out the battery plug.
2) Open the battery cover.
WARNING!
There is a risk of crushing injury. Do not insert a
hand between the battery cover and the
chassis.
3) Attach the lifting device in the lifting eyes.
4) Lift the battery and set it to one side.
WARNING!
Observe care to avoid splashing waste acid or
oxide from the battery.
5) Perform a battery inspection in accordance with
Maintenance of the truck page 40.
6) Lift the battery in.
7) Carefully close the battery cover.
WARNING!
There is a risk of crushing injury. Do not insert a
hand between the battery cover and the
chassis.
BATTERY 08
25