Truck Computer (Atc); Introduction; General; Symbols And Characters On The Display - UniCarriers PLL Series Instruction Handbook Manual

09 TRUCK COMPUTER (ATC)

Introduction

The truck is equipped with an ATC system; a control and
monitoring system consisting of a display, a keyboard and a
control unit. The system is also equipped with a buzzer in order
to catch the driver's attention in various situations.
NOTE!
Not available on TS trucks

General

In order to start the truck, the driver must enter Operator ID and
PIN code or use the keylock (option). Using the display, the
driver may find a lot of information after turning on the truck,
28
e.g.: date, time, battery status, as well as any error codes and
warnings. The Operator ID and PIN code are supplied along
with the delivery of the truck. The code should be changed after
delivery.

Symbols and characters on the display

A. Date: Day-month-year.
B. Time: Hours-minutes
C. Hour meter: Shows active
time or logon time. Normally,
total active time is
displayed.
D. Symbol normal speed/slow
speed: Shows whether the
truck is in normal speed or
crawler mode
(hare/tortoise).
E. Field for error codes: An error
code consisting of an
E+digits is shown if a fault
occurs (if a warning is
displayed, it covers the entire
upper row).
F. Battery indicator: Shows
battery status.
G. Symbol for lift stop. If the
truck is equipped with a
restart function, press push
button to continue
lifting.