UniCarriers PLL Series Instruction Handbook Manual page 12

06 MACHINE PLATES
USA machine plates
The machine plate contains important information. Read it
carefully! Permitted loads may not be exceeded. The stated
load limit assumes that the load is evenly distributed over the
forks.
Figure 3. Machine plates
1. Model designation
2. Type Serial No./Version
(S=Special version)
3. Truck Type
4. Year of manufacture, week
and guarantee limit in
months
5. Weight without battery
6. Weight with battery
12
7. Minimum battery weight
8. Maximum battery weight
9. Battery voltage
10. Battery type maximum
capacity
11. Actual capacity, Q
12. Load centre distance, D
Figure 4. Load limit plates
1. Actual capacity, Q
2. Load centre distance, D
3. Lift height for fork lift, H
4. Lift height for straddle lift
5. Load limit for straddle lift,
Q1
WARNING!
To ensure the machine meets the stability
requirements always ensure the the lift capacity
shown on the machine plate is observed.
6. Load limit for fork lift with load
on straddle lift, Q2
7. Load limit for fork lift without
load on straddle lift
8. Maximum lifting height for
fork lift with load on straddle
legs
9. Serial number of the
attachment