IBM ESS 3000 Hardware Planning And Installation Manual page 69

l. To test the ping connection with the EMS node, highlight the 8. Ping tests option. Use the c key to
change the IP address, a new panel will open. Set the IP address that was added during the EMS
setup phase and also defined on the customer worksheet. Press the Ctrl + G keys to save the
changes.
m. To ping the EMS node with the target IP address, select the 8. Ping tests option or highlight the
option and press the Enter key.
n. Click Back and then click Exit. You are logged out automatically.
Before moving on, ensure that there are no faulty LED lights on this canister. If you face any issues, see
the Chapter 5, "Troubleshooting (SSR tasks)," on page 59 topic.
Chapter 4. Installing 57