Figure 11. Rear view of an Elastic Storage System 3000
Planning for cable connections to PDUs
Each enclosure must be connected to a pair of power outlets by selecting appropriate feature codes while
ordering the system. The following table lists the feature codes of the power cords:
Table 5. Power cord feature codes
Feature codes
6458
6671
6672
6665
Attention: Ensure that sufficient power supply circuits are available to provide the total power
requirements of the equipment that is connected to each power supply circuit.
26 IBM Elastic Storage System 3000: Hardware Planning and Installation Guide
Description
Power Cord 4.3m (14-ft), Drawer to IBM PDU,
(250V/10A) with C13/C14 connectors
Power Cord 2.7m (9-ft), Drawer to IBM PDU (250V/
10A) with C13/C14 connectors
Power Cord 2m (6.5-ft), Drawer to IBM PDU (250V/
10A) with C13/C14 connectors
Power Cord 2.8m (9.2-ft), Drawer to IBM PDU
(250V/10A) with C19/C20 connectors