GSE EC User Manual page 32

CZ G-Systems Engineering
Maximum speed setting day time. Here you can choose the maximum
speed setting of the ventilator which never should be exceeded. On the top
left side you can see the actual missing empty segments each is 10% fan
speed. Change the settings again with SET/SAVE as described above.
Attention! At the end of the manual you will find the section
"Calibration of the minimum speed"!
max .
Minimum speed setting day
time. Here you can choose the
minimum speed of the ventilator
which never should be undercut.
On the down left side speed bar
you can see the actual setting for
each filled segment is 10% fan
speed. Change the settings again
with SET/SAVE as described
above.
Repeat all 6 settings we
explained for day time now you
can give the night time values of
the fan.
After you have gone through
the 6 night time settings in the
menu, you can set the negative
pressure setting.
The negative pressure
decreases the speed of the intake
air fan. Example: at -20% is the
intake air fan running 20% slower
as the exhaust air fan. At -0% they
have both the same speed.
Change the value with the
SET/SAVE button. Proceed to the
next setting light sensor switch
level.
EN
29