Warranty; Warranty Card; Warranty Terms - SaMASZ PG 150 Operator's Manual

11. WARRANTY

11.1. Warranty card

The product's quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
Warranty card – if not filled in, corrected or illegible – is not valid

11.2. Warranty terms

1. The manufacturer provides good quality and defect-free operation of covered by this warranty
if the machine's operation is performed in accordance with the operator's manual.
2. Faults or damages to the machine found within the 12-month period from the date of purchase
shall be removed free of charge at the purchaser or the manufacturer.
3. Faults or damages should be submitted personally, in writing or by telephone. Repairs shall be
carried out within 14 days. Any repair which is subject to warranty should be carried out by an
authorised SaMASZ dealer.
4. Warranty claims regarding replacement of the product or reimbursement are considered if
received within 14 days by the Manufacturer.
5. The following parts and situations are not covered by warranty:
fortuitous events or other occurrences, for which the Manufacturer cannot bear any
responsibility,
use of the machine for any purpose other than described in the operator's manual,
normal wearing of machine's working parts
damage of the trimmer's components due to operation with contaminated cutting
bars,
any mechanical damages,
any damages resulting from grinding non-wooden materials,
missing grease at points requiring lubrication, or insufficient amount of grease there,
missing or worn cutting knives, knife holder, cutting disk and grinder's hydraulic
assembly.
6. The Purchaser bears the costs of technical evaluation - when the manufacturer finds that a
claimed product is free of defects and a technical report confirms that.
Operator's manual
SCISSOR TRIMMER – PG
- 20 -
SCISSOR TRIMMER
PG-150, PG-200
PG-150L, PG-200L
Type
Serial no.
Date of manufacture
stamp
Date of purchase
Dealer signature
Dealer's stamp
.