4.
5. EQUIPMENT AND FITTINGS
The machine are sold with the following standard equipment:
scissor trimmer with any parts required for its connection,
warranty card,
operator's manual,
catalogue of parts.
Equipment and spare parts:
cutting bars,
copper skid,
guide and pressure blocks,
cylinder mounting pins,
hydraulic cylinder,
reversing valve,
any other parts included in catalogue of parts.
Additional equipment:
warning plates with combined lights and reflectors,
triangle warning plate.
NOTE
Use only original SaMASZ fittings and spare parts. Spare parts of unknown
origin or new made are of less strength and have unfavourable influence the on
machine's overall performance and safety.
NOTE:
Use only original SaMASZ fittings and spare parts. Spare parts of unknown
origin or new made are of less strength and have unfavourable influence the on
machine's overall performance and safety.
6. OPERATION
6.1. Maintenance and service
Each time before operating the machine do the following:
make sure that both the tractor and the extension arm, which the machine is mounted on, work
properly,
examine bolt connections of cutting disk, knife holders, knives and tighten if necessary,
examine torque of all bolts and nuts according to Tab. 5,
Operator's manual
:
SCISSOR TRIMMER
- 15 -
PG-150, PG-200
PG-150L, PG-200L