Specifications - SaMASZ PG 150 Operator's Manual

9. SPECIFICATIONS

Tab. 6. Specifications of the machine
No. Characteristic parameters
1. Working width [m]
2. Max. technical cutting diameter [mm]
3. Max. real cutting diameter [mm]
4. Weight [kg]
5. Dimensions (length/width/height) [mm]
6. Drive type
Recommended hydraulic oil [l/min]
7.
8. Max. permissible pressure [MPa]
Nominal WOM rpm (for SaMASZ extension arm)
9.
[rpm]
Mounting on extension arm
10.
Nozzles of hydraulic hoses
11.
12. Working speed [km/h]
13. Transport speed [km/h]
14. Number of operators
Grease for joints
15.
16. Level of noise emitted by
the machine
L – level of noise exposure related to an 8-hour work shift. Time-averaged acoustic pressure
pA
level for emission corrected by frequency characteristic A.
L – maximum value of measurement for acoustic pressure level for emission corrected by
Amax
frequency characteristic A.
L – peak acoustic pressure level for emission corrected by frequency characteristic C.
Cpeak
Operational lateral range of scissor cutter for mounting on extension arm KWT 550 is up to 7
m, and for KWT 650 up to 8 m.
Operator's manual
L
pA
L
Amax
L
Cpeak
- 18 -
SCISSOR TRIMMER
PG-150, PG-200
PG-150L, PG-200L
Type
PG 150 / PG 150L
1,5
100
100
190
1500/860/220
hydraulic
45÷60
16
300-350
6 bolts M14x50
M30x2
Max 10
Max 25
One person
ŁT - 43
95 ± 1 dB
106 ± dB
109 ± dB
PG 200 / PG 200L
2,0
225
2000/860/220