Wired Remote; Wireless Remote - K-array Kommander-KA02 User Manual

Wired Remote

AUDIO CONTROL
Standby
Status LED pulse blinking
Hold down the Bluetooth button for 10
Bluetooth
seconds to set the system to Bluetooth
Pairing
Pairing mode
Status LED
System power
Volume up
Volume down
Pairing LED
Bluetooth
Wiered remote
inlet
Power On
solid white
Kommander-KA02

Wireless Remote

Status LED
System power
Power switch
Play/Pause
Mute
The wireless remote provides complete control over the
Azimut playback features.
The remote includes a high-efficiency rechargeable battery
with a switch that can extend the batter life when powered off.
When the battery discharges to approximately 10% remaining
life, the Status LED begins flashing: connect the remote's
charge port to a standard USB port to recharge the internal
battery; use the provided cable.
received
Status LED single blink
Press the Bluetooth button to set the
Bluetooth
Pairing
system to Bluetooth pairing mode
User Guide
Bluetooth
Skip forward
Skip back
Volume up
Volume down
Charge port
Command
Battery
low
not received
long blinking flashing
7