1. Remove old batteries.
Untwist the Pendant and remove the dead (6) or (8) D Alkaline
batteries,
1. Insert new batteries
Next, insert new (6) or (8) Alkaline batteries, negative end first.
Twist the Pendant lock to secure back onto the unit.
NEVER mix old and new batteries. NEVER use damaged or dropped
batteries. If possible, test batteries before using.
1. Plug in the Pendant
To charge, plug the charger power input into the jack in the bottom
of the Pendant and plug the wall port into the desired outlet. The
Pendant does not need to be connected to the drapery to charge.
Changing alkaline batteries
Charging lithium ion batteries
Fig. X; Remove old then Insert new Batteries into the Pendant
Fig. X; Screw the Pendant onto the Cord
6
Fig. X