Fm Operation; Selecting Fm Mode; Auto Scan; Manual Scan - Hitachi KC120E Instruction Manual

FM Operation

Selecting FM Mode

To switch the unit to FM mode, turn MODE repeatedly.

Auto Scan

To search for an FM station automatically, press SELECT to start the forward
or reverse scanning. The display will show the frequency being searched.
Once a station has been found, the scanning will stop automatically.

Manual Scan

To search for FM stations manually, turn the TUNE dial until your desired
station is reached.
With FM radio, it may be necessary to fine tune each station by turning
TUNE repeatedly. Each turn will adjust the frequency by 0.05MHz. If
reception is still poor, adjust the position of the aerial or try moving the
radio to another location.

Scan Setting

This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press MENU and then turn the TUNE dial to select <Scan setting>.
Press SELECT to confirm.
2. Turn the TUNE dial to select <All stations> or <Strong stations only>.
Press SELECT to confirm.

Audio Setting

FM is able to search for Stereo or Mono stations.
1. Press MENU and then turn the TUNE dial to select <Audio setting>.
Press SELECT to confirm.
GB
23