How To Change The Fader Unit - Vestax PMC-07ProISP Owner's Manual

HOW TO CHANGE THE FADER UNIT

Note
Use a plus driver fitting screw.
Caution: When you change any parts, do not
loose the screws with
HOW TO REMOVE THE TOP PANEL
q Remove each fader knobs and 4 screws which
fix the top panel.
w Remove the top panel.
HOW TO CHANGE THE FADER UNIT
q Remove the two screws on the fader panel.
w Remove the fader unit from position in mixer.
e Carefully remove the multi-cable connector
from fader unit.
r Attach multi-cable connector to new fader unit.
t Position the fader unit carefully and secure with
screws.
HOW TO CHANGE THE Q-STICK UNIT
q Remove the three screws on the Q-stick panel.
w Remove the Q-stick unit from position in mixer.
e Carefully remove the multi-cable connector from
Q-stick unit.
r Attach multi-cable connector to new Q-stick unit.
t Position the Q-stick carefully and secure with
screws.
marking.
Top panel
Main panel
Insert the
multi-cable connector
Insert the
multi-cable connector
8
Driver
Knob
Driver
QS - 07
ISP