HOW TO CHANGE THE FADER UNIT
■HOW TO REMOVE THE CROSSFADER PANEL
○
Remove crossfader knob and 2screws which fix
1
the crossfader panel.
○
Remove the crossfader panel.
2
■HOW TO CHANGE THE FADER UNIT
○
Remove the screws on the fader panel.
1
○
Remove the fader unit from position in mixer.
2
○
Carefully remove the multi-cable connector
3
from fader unit.
○
Attach multi-cable connector to new fader unit.
4
○
Position the fader unit carefully and secure with
5
screws.
Insert the
multi-cable connector
Top panel
Crossfader
Top panel
Set switch to "PCV" position.
8
panel
Note
Use a plus driver fitting screw.
Caution: When you change any parts, do not
loose the screws with
CF-PCV For
PMC SERIES
( PMC05ProI I, PMC06ProA, etc)
PMC CONNECTOR
Driver
Driver
marking.
Set switch to "PMC" position